
J4350 and J6350 Services Router Getting Started Guide
Action
From the CLI, en
ter the
show system autoinstallation status command.
Sample Output
user@host> show system autoinstallation status
Autoinstallation status:
Master state: Active
Last committed
file: None
Configuration server of last committed file: 10.25.100.1
Interface:
Name: ge-0/0/0
State: Configuration Acquisition
Acquired:
Address: 192.16
8.124.75
Hostname: host-ge-000
Hostname source: DNS
Configuration fi
lename: router-ge-000.conf
Configuration filename server: 10.25.100.3
Address acquisition:
Protocol: DHCP Cli
ent
Acquired address: None
Protocol: RARP Client
Acquired address:
None
Interface:
Name: ge-0/0/1
State: None
Address acquisition:
Protocol: DHCP Client
Acquired address: N
one
Protocol: RARP Client
Acquired address: None
What It Means
The output shows the parameters configured for autoinstallation. Verify that the
values displayed are correct for the Services Router when it is deployed on the
destination network
.
130 Verifying Autoinstallation
Comentários a estes Manuais