
J4350 and J6350 Services Router Getting Started Guide
Table 60: RJ-45 Console Connector Pinout (continued)
Pin Signal Description
7DSRInput
Data Set Ready
8CTSInput
Clear to Send
Table 61 describes the DB-9 connector pinouts.
Table 61: DB-9 Console Connector Pinout
Pin Signal Direction Description
1DCD
<–
Carrier Detect
2
RxD
<–
Receive Data
3TxD
–>
Transmit Data
4
DTR
–>
Data Terminal Ready
5
Ground
—
Signal Ground
6DSR
<–
Data Set Ready
7RTS
–>
Request To Send
8CTS
<–
Clear To Send
9RING
<–
Ring Indicator
E1 and T1 RJ-48 Cable Pinouts
The E1 and T1 PIMs use an RJ-48 cable, which is not supplied with the PIM.
CAUTION: To maintain agency approvals, use only a properly constructed, shielded
cable.
Table 62 through Table 65 describe the RJ-48 connector pinouts.
Table 62: RJ-48 Connector to RJ-48 Connector (Straight) Pinout
RJ-48 Pin (on T1/E1
PIM) (Data Numbering
Form)
RJ-48 Pin
(Data Numbering
Form) Signal
11RX,Ring,
–
22RX,Tip,+
44
TX, Ring, –
55TX,Tip,+
196 E1 and T1 RJ-48 Cable Pinouts
Comentários a estes Manuais