Juniper Networks EX3200 Manual do Utilizador descarregar pdf (Página 149)

Figure 41: Attaching the Side-Rail Bracket to the Switch Chassis

5. Insert the 4x6-mm Phillips flat-head mounting screws into the remaining four

holes in the side-rail brackets and tighten the screws.

6. Have one person grasp both sides of the switch, lift the switch, and position it

in the rack, aligning the side-rail bracket holes with the threaded holes in the

front post of the rack. Align the bottom hole in both the mounting brackets with

a hole in each rack rail, making sure the chassis is level. See Figure 42 on page 123.

Figure 42: Mounting the Switch to the Front Posts in a Rack

g004477

Side-rail

bracket

Switch

Front

bracket

7. Have a second person secure the front of the switch to the rack by using the

appropriate screws for your rack.

8. Slide the rear brackets into the side-rail brackets. See Figure 43 on page 124.

Mounting an EX3200 or EX4200 Switch on Four Posts in a Rack or Cabinet ■ 123

Chapter 9: Installing the Switch

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 283 284

Sem comentários

Juniper Networks EX3200 Manual do Utilizador Página 149