Juniper Networks EX3200 Manual do Utilizador descarregar pdf (Página 50)

Table 8: Status LED on Network Ports in EX3200 and EX4200 Switches (continued)

State and DescriptionLCD IndicatorLED

Indicates the speed.

The speed indicators for network ports on the front panel are:

■

One blink per second—10 Mbps

■

Two blinks per second—100 Mbps

■

Three blinks per second—1000 Mbps

The speed indicators for network ports on the SFP uplink

module are:

■

Green—1000 Mbps

■

Unlit—10/100 Mbps

The speed indicators for network ports on the SFP+ uplink

module are:

■

Green—The speed of the transceiver installed in the port

is the same as the speed at which the uplink module port

is configured to operate.

■

Unlit—The speed of the transceiver installed in the port

is not the same as the speed at which the uplink module

port is configured to operate.

The speed of the XFP uplink module ports is always 10 Gbps;

therefore, the LED is always green.

Related Topics ■ Front Panel of an EX3200 Switch on page 8

■ Front Panel of an EX4200 Switch on page 10

■ Uplink Modules in EX3200 and EX4200 Switches on page 33

■ LCD Panel in EX3200 and EX4200 Switches on page 13

Management Port LEDs in EX3200 and EX4200 Switches

The management port on EX3200 and EX4200 switches has two LEDs that indicate

link/activity and port status (see Figure 15 on page 25 or Figure 16 on page 25). The

management port is set to full-duplex and the speed is set to 100 Mbps.

24 ■ Management Port LEDs in EX3200 and EX4200 Switches

Complete Hardware Guide for EX3200 and EX4200 Ethernet Switches

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 283 284

Sem comentários

Juniper Networks EX3200 Manual do Utilizador Página 50