Juniper-networks ERX-1410 Manual do Utilizador descarregar pdf (Página 47)

Installing ERX Modules

This chapter describes how to physically install and remove ERX

modules. If the modules you want are already installed in the system, you

can skip this chapter and go to Chapter 4, Cabling the ERX System.

For information about managing installed modules, see ERX System

Basics Configuration Guide, Chapter 5, Managing Line Modules and

SRP Modules.

Overview

In the ERX-1400 series, modules mount vertically in a chassis with 14

slots, whereas in the ERX-700 series, modules mount horizontally in a

chassis with 7 slots. See Figure 3-1. For information about compatibility

between lines modules and SRP modules, see Table B-1 in Appendix B,

Module Specifications.

Topic Page

Overview 3-1

Protecting Modules and Slots 3-4

Safety Guidelines 3-6

Installing SRP I/O and SRP Modules 3-6

Installing Line Modules and Their I/O Modules 3-10

Removing a Module 3-13

Installing Components for Line Module Redundancy 3-14

The Next Step 3-17

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 183 184

Sem comentários

Juniper-networks ERX-1410 Manual do Utilizador Página 47