Juniper Networks T1600 Manual do Utilizador Página 13
- Página / 56
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Figure 6: Typical DC Source Cabling to the T1600 Routing Node
Provisioning Additional Power for the T1600 Routing Node
For a maximally configured T1600 routing node, we recommend that you provision
at least 64 A @ –48 VDC for each power supply input in the system.
We recommend that you provision a facility circuit breaker for each DC power supply
input rated for at least 125% of the continuous current that the input draws at
–48 VDC.
Replacing the Rear Fan Tray
NOTE: If the rear fan tray (model number FAN-REAR-TX-T640-S) is already installed,
replacing the rear fan tray is not necessary. Proceed to “Upgrading the DC Power
Supplies” on page 17.
The rear fan tray is hot-insertable and hot-removable. To replace a fan tray, use the
following procedures:
■ Removing the Rear Fan Tray on page 14
■ Installing a Rear Fan Tray on page 15
Replacing the Rear Fan Tray ■ 13
Replacing the Rear Fan Tray
- T1600 Routing Node Overview 3
- T1600 Upgrade Kit 5
- Power Supplies 6
- Table 2: Fault Tolerance 7
- 8 ■ T1600 Upgrade Kit 8
- T1600-SIBs 9
- Blower in the description 11
- Preparing the Site 12
- Typical Power Distribution 12
- Replacing the Rear Fan Tray 13
- Removing the Rear Fan Tray 14
- Installing a Rear Fan Tray 15
- Preparing the DC Power Cables 17
- Tools and Parts Required 17
- ■ Wire cutters 18
- ■ Flashlight 18
- OFF position (O) 22
- 2. Fasten the captive screws 24
- ON position ( 26
- Upgrading SIBs 27
- 28 ■ Upgrading SIBs 28
- Preparing to Upgrade the SIBs 29
- Tools Required 30
- Upgrading SIBs ■ 31 31
- Installing a T1600-SIB 32
- Upgrading SIBs ■ 33 33
- Exiting Upgrade Mode 34
- Verifying Operation 35
- 36 ■ Upgrading SIBs 36
- command: 37
- 38 ■ Upgrading SIBs 38
- Replacing the Craft Interface 40
- Removing the Craft Interface 40
- Update Install Base 43
- DC Power Cable Specifications 46
- JUNOS References 49
- J-Web User Guide 50
- Hardware Documentation 50
- Documentation Feedback 54
- Requesting Technical Support 55
- Revision History 56
Manuais e produtos relacionados com Routers Juniper Networks T1600
Routers Juniper Networks T1600 Manual do Utilizador
(113 páginas)
(113 páginas)
Routers Juniper Networks M7i Manual do Utilizador
(23 páginas)
(23 páginas)
Routers Juniper Networks ISG 2000 Manual do Utilizador
(114 páginas)
(114 páginas)
Makita JR3030 manuals
Owner’s manuals and user’s guides for Tools Makita JR3030.
We providing pdf manuals Makita JR3030 for download free by document types:
Comentários a estes Manuais