Juniper Networks T1600 Manual do Utilizador

T1600 Internet Routing NodePIC GuideJuniper Networks, Inc.1194 North Mathilda AvenueSunnyvale, California 94089USA408-745-2000www.juniper.netPart Numb

Table 10: T1600 Services PIC/FPC Compatibility (continued)40-GigabitTunnelServicesTunnelServicesMultiServicesMonitoringServices IIIMonitoringServices

SONET alarms: Alarm indication signal—line (AIS-L) Alarm indication signal—path (AIS-P) Bit error rate signal degrade (BERR-SD) Bit error rate signal

Table 42: Optical Interface Support for the SONET/SDH OC192 PIC (continued)Very Short Reach (VSR) 1 TransceiverParameterOIF VSR4-1StandardMMF cable: 9

SONET/SDH OC192c/STM64 PICs with XFPLeft: 1-port SONET/SDH OC192c/STM64 PIC; Right: 4-port SONET/SDH OC192c/STM64 PIC 1-port: JUNOS 8.5 and later (Typ

Configuration of SONET or SDH framing on a per-port basis on the 4-port Type 4 PIC SONET/SDH framing Link aggregation Alarm and event counting and de

SONET alarms: Alarm indication signal—line (AIS-L) Alarm indication signal—path (AIS-P) Bit error rate signal degrade (BERR-SD) Bit error rate signal

Table 43: Optical Interface Support for SONET/SDH OC192 PICs (continued)Long Reach (LR-2)Intermediate Reach (IR-2)Short reach (SR-1)ParameterXFPXFPXFP

SONET/SDH OC768c/STM256 PIC JUNOS 8.5 and later (Type 4)Software release One OC768 port Power requirement: 1.37 A @ 48 V (65.7 W) Optical interface su

SONET/SDH framing Link aggregation Alarm and event counting and detection Dual-router automatic protection switching (APS) Multiprotocol Label Switch

SONET alarms: Alarm indication signal—line (AIS-L) Alarm indication signal—path (AIS-P) Bit error rate signal degrade (BERR-SD) Bit error rate signal

Table 44: Optical Interface Support for SONET/SDH OC768 PICs (continued)Short Reach (SR)Optical Parameter300-pin multi-source agreement (MSA)ITU G.69

Table 11: T1600 SONET/SDH PIC/FPC Compatibility (continued)OC768c/STM256,1-portOC192c /STM64,4-portXFPOC192c /STM64,1-portXFPOC192c /STM64,1-portOC48c

Tunnel Services PIC JUNOS 8.5 and later (Type 1) JUNOS 8.5 and later (Type 2) JUNOS 8.5 and later (Type 3)Software release Power requirement: 0.07 A @

40-Gigabit Tunnel Services PIC JUNOS 8.5 and laterSoftware release Power requirement: 0.07 A @ 48 V (3.4 W)Description 40 gigabit loopback bandwidth t

Appendix AHigh Availability FeaturesHigh availability features include Routing Engine redundancy, graceful Routing Engineswitchover (GRES), nonstop br

Copyright © 2008, Juniper Networks, Inc. All rights reserved.Juniper Networks, the Juniper Networks logo, NetScreen, and ScreenOS are registered trade

Adaptive Services II PIC JUNOS 8.5 and later (Type 1)Software release Supports tunnel services. This feature is included with the PIC and does not req

Table 13: Adaptive Services PICs Software FeaturesAdaptive ServicesII Layer 2 ServicesPICAdaptive Services IIPICSoftware Feature––GRE Key––GRE dont-fr

Table 13: Adaptive Services PICs Software Features (continued)8.58.5Encapsulations Multilink Frame Relay (MLFR) Multilink Point-to-Point Protocol (MLP

Adaptive Services II Layer 2 Services PIC JUNOS 8.5 and later (Type 1)Software release Supports Layer 2 Service package only. Tunnel services are incl

Table 14: Adaptive Services PICs Software FeaturesAdaptive ServicesII Layer 2 ServicesPICAdaptive Services IIPICSoftware Feature––GRE Key––GRE dont-fr

Table 14: Adaptive Services PICs Software Features (continued)8.58.5Encapsulations Multilink Frame Relay (MLFR) Multilink Point-to-Point Protocol (MLP

ATM2 E3 IQ PIC JUNOS 8.5 and later (Type 1)Software release Four E3 ports Power requirement: 0.41 A @ 48 V (20 W) Intelligent queuing (IQ) PICs suppor

Per-virtual circuit (VC) and per-virtual path (VP) traffic shaping Unspecified bit rate (UBR) traffic shaping Fine-grained variable bit rate (VBR) tr

This guide provides an overview and description of the Physical Interface Cards (PICs)supported by the Juniper Networks T1600 Internet routing node. T

ATM2 OC3/STM1 IQ PIC JUNOS 8.5 and later (Type 1)Software release Two OC3 ports Power requirement: 0.41 A @ 48 V (20 W) Intelligent queuing (IQ) PICs

Circuit cross-connect (CCC) for leveraging ATM access networks User-configurable virtual circuit (VC) and virtual path (VP) support Support for idle

Table 15: Optical Interface Support for ATM2 OC3 IQ PICs (continued)MultimodeIntermediate Reach (IR)ParameterMultivendor agreementTelcordia GR-253Stan

ATM2 OC12/STM4 IQ PICsLeft: 1-port ATM2 OC12/STM4 IQ PIC; Right: 2-port ATM2 OC12/STM4 IQ PIC 1-port: JUNOS 8.5 and later (Type 1) 2-port: JUNOS 8.5 a

Circuit cross-connect for leveraging ATM access networks User-configurable virtual circuit (VC) and virtual path (VP) support Support for idle cell o

Table 16: Optical Interface Support for ATM2 OC12/STM4 IQ PICs (continued)Multimode TransceiverIntermediate Reach (IR) TransceiverParameterMultivendor

ATM2 OC48/STM16 IQ PIC with SFP JUNOS 8.5 and later (Type 2)Software release One OC48 port Power requirements: 0.41 A @ 48 V (20 W) Intelligent queuin

Multiprotocol Label Switching (MPLS) circuit cross-connect for leveraging ATM accessnetworks User-configurable virtual circuit (VC) and virtual path

Table 17: Optical Interface Support for ATM2 OC48/STM16 IQ PICs (continued)MultimodeIntermediate Reach (IR)Optical ParameterSFPSFPTransceiver typeMult

Channelized DS3 IQ PIC JUNOS 8.5 and later (Type 1)Software release Four DS3 ports Power requirement: 0.32 A @ 48 V (15.6 W) Intelligent queuing (IQ)

Table 1: PICs Supported in the T1600 Internet Routing NodePageFirst JUNOSSupportPortsPIC Family and TypeATM2 IQ188.54ATM2 E3 IQ208.52ATM2 OC3/STM1 IQ2

Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection(RED), weighted random early detection (WRED) Simple Network

Channelized OC3 IQ PIC JUNOS 8.5 and later (Type 1)Software release One OC3 port Power requirement: 0.39 A @ 48 V (18.6 W) Intelligent queuing (IQ) PI

Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection(RED), weighted random early detection (WRED) Simple Network

Table 18: Optical Interface Support for Channelized OC3 IQ PICs (continued)Intermediate Reach (IR) SFP TransceiverOptical Parameter1274 through 1356 n

Channelized OC12 IQ PIC JUNOS 8.5 and later (Type 1)Software release One OC12 port Power requirement: 0.23 A @ 48 V (10.8 W) Intelligent queuing (IQ)

Duplex SC/PC connector (Rx and Tx); single-mode fiber Optical interface support—See Table 19 on page 35Cables and connectorsOne tricolor per port: Of

Channelized STM1 IQ PIC JUNOS 8.5 and later (Type 1)Software release One STM1 port Power requirement: 0.39 A @ 48 V (18.6 W) Intelligent queuing (IQ)

Alarm indication signal (AIS-L, AIS-P) Bit error rate signal degrade (BERR-SD), bit error rate signal fail (BERR-SF) Bit interleaved parity errors B1

DS3 PIC JUNOS 8.5 and later (Type 1)Software release Four DS3 ports Power requirement: 0.47 A @ 48 V (22.5 W) Integrated DSU interoperability with lea

Custom 10-ft (3.05-m) posilock SMB to BNC male cable, separate Rx and Tx (provided)Cables and connectorsOne tricolor per port: Off—Not enabled Green—

Table 1: PICs Supported in the T1600 Internet Routing Node (continued)PageFirst JUNOSSupportPortsPIC Family and Type478.52Gigabit Ethernet IQEthernet

E3 IQ PIC JUNOS 8.5 and later (Type 1)Software release Four E3 ports Power requirement: 0.38 A @ 48 V (18 W) Intelligent queuing (IQ) PICs support fin

Quality of service (QoS) per port: weighted round-robin (WRR), random early detection(RED), weighted random early detection (WRED) Simple Network Man

Fast Ethernet PIC JUNOS 8.5 and later (Type 1)Software release 4 100Base-TX ports Power requirement: 0.14 A @ 48 V (6.8 W)Description High-performance

Status LED, one bicolor: Off—PIC ports not enabled Green—PIC is operating normally Red—PIC has an error or failure4-port PIC—One pair of port LEDs: Li

Gigabit Ethernet PICs with SFPLeft: 1-port Gigabit Ethernet PIC; Right: 2-port Gigabit Ethernet PICLeft: 4-port Gigabit Ethernet PIC; Right: 8-port Gi

Software release 1-port: JUNOS 8.5 and later (Type 1) 2-port: JUNOS 8.5 and later (Type 2) 4-port: JUNOS 8.5 and later (Type 2) 10-port: JUNOS 8.5 and

You can install any transceiver supported by the PIC. For information about installingand removing transceivers, see the PIC and Transceiver Installa

Gigabit Ethernet IQ PICs with SFPLeft: 1-port Gigabit Ethernet IQ PIC; Right: 2-port Gigabit Ethernet IQ PIC 1-port: JUNOS 8.5 and later (Type 1) 2-po

You can install any transceiver supported by the PIC. For information about installingand removing transceivers, see the PIC and Transceiver Installa

Table 21: Optical Interface Support for Gigabit Ethernet IQ PICs with SFP (continued)1000Base-LH1000Base-LX1000Base-SXParameter–20 through –3 dBm–19 t

Table 1: PICs Supported in the T1600 Internet Routing Node (continued)PageFirst JUNOSSupportPortsPIC Family and Type988.51SONET/SDH OC192c/STM641028.5

Gigabit Ethernet IQ2 PICs with SFPLeft: 1-port Gigabit Ethernet IQ2 PIC (Type 1); Right: 8-port Gigabit Ethernet IQ2 PIC (Type 2)50 Gigabit Ethernet

g002378Center: 10-port Gigabit Ethernet IQ2 PIC (Type 3) 4-port: JUNOS 8.5 and later (Type 1) 8-port: JUNOS 8.5 and later (Type 2) 8-port: JUNOS 8.5 a

Intelligent handling of oversubscribed traffic for Type 1 and Type 2 PICs Optical diagnostics and related alarms Quality of service (QoS) per channel

Table 22: Optical Interface Support for Gigabit Ethernet IQ2 PICs with SFP1000Base-LH1000Base-LX1000Base-SXParameterSingle-modeSingle-modeMultimodeOpt

10-Gigabit Ethernet IQ2 PIC with XFP JUNOS 8.5 and later (Type 3)Software release One 10-Gigabit Ethernet port Power requirements: 1.2 A @48 V (56 W)D

Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection(RED), weighted random early detection (WRED) Configurable WA

Table 23: Optical Interface for 10-Gigabit Ethernet IQ2 PICs10-GBase-Z10-GBase-E10-GBase-L10-GBase-SParameterXFP-10G-Z-OC192-LR2XFP-10G-E-OC192-IR2XFP

10-Gigabit Ethernet PIC with XENPAK JUNOS 8.5 and later (Type 3): 10GBase-ER, 10GBase-LR, 10GBase-SR, and 10GBase-ZRtransceivers JUNOS 9.0R2 and later

Duplex SC/PC connector (RX and TX) Optical interface support—See Table 24 on page 58 and Table 25 on page 59Cables and connectorsStatus LED, one bico

Table 24: Optical Interface Support for 10-Gigabit Ethernet PICs with XENPAK (continued)Extra-LongWavelength Serial(10GBase-ZR), LANRateExtra-Long Wav

FPCs SupportedT1600 routing nodes support the FPCs listed in Table 2 on page 6.Table 2: FPCs Supported by the T1600 Routing NodeFirst JUNOSReleaseMaxi

Table 25: Optical Interface Support for 10-Gigabit Ethernet PICs with XENPAK-OTNs (continued) Transmitter type: Electro-absorption Modulated Laser (EM

Table 26: XENPAK-OTN Optical Signal-to-Noise Ratio (OSNR) Performance (continued)CD Tolerance(ps/nm)Input-PowerRange(dBm)Post-FECBERPre-FECBERFEC Type

10-Gigabit Ethernet LAN/WAN PIC with XFP JUNOS 9.0 and later (Type 4)Software release Four 10-Gigabit Ethernet ports Power requirements: 0.9 A @48 V (

Quality of service (QoS) per channel: weighted round-robin (WRR), random early detection(RED), weighted random early detection (WRED) Configurable WA

Table 28: Optical Interface for 10-Gigabit Ethernet LAN/WAN PICs10-GBase-Z10-GBase-E10-GBase-L10-GBase-SParameterXFP-10G-Z-OC192-LR2XFP-10G-E-OC192-IR

10-Gigabit Ethernet DWDM PIC JUNOS 8.5 and later (Type 3)Software release One 10-Gigabit Ethernet port Power requirement: 0.55 A @ 48 V (26.6 W) Suppo

Duplex SC/PC connector (RX and TX)Cables and connectorsStatus LED, one bicolor: Off—PIC is not enabled Green—PIC is operating normally Red—PIC has an

Monitoring Services II PIC JUNOS 8.5 and later (Type 1)Software release Passive traffic monitoring or flow collection services Power requirement: 0.4

Status LED, one tricolor: Off—PIC is offline and it is safe to remove it from the chassis. Green—PIC is operating normally. Amber—PIC is initializing.

Monitoring Services III PIC JUNOS 8.5 and later (Type 2)Software release Power requirement: 0.4 A @ 48 V (19 W) Supports dynamic flow capture 2 Gbps o

PIC/FPC CompatibilityTable 3 on page 7 through Table 12 on page 11 provide PIC/FPC compatibility matrices for the current PICs for T1600 routingnodes.

Two Status LEDs: PIC and APPPIC LED, one tricolor: Off—PIC is offline and it is safe to remove it from the chassis. Green—PIC is operating normally. A

MultiServices PICsLeft: MultiServices 100 PIC; Right: MultiServices 400 PICCenter: MultiServices 500 PICMultiServices PICs 71MultiServices PICs

Software release MultiServices 100: JUNOS 8.5 and later (Type 1) MultiServices 400: JUNOS 8.5 and later (Type 2) MultiServices 500: JUNOS 8.5 and late

Table 30: MultiServices PICs Software Features Supported on the T1600 Routing Node (continued)8.58.58.5Port Address Translation (PAT) for port numbers

SONET/SDH OC3c/STM1 PIC JUNOS 8.5 and later (Type 1)NOTE: Although the illustration shows a multimode PIC, a multimode PIC and a single-modeintermedia

One tricolor per port: Off—Not enabled Green—Online with no alarms or failures Amber—Online with alarms for remote failures Red—Active with a local al

Table 31: Optical Interface Support for SONET/SDH OC3c/STM1 PICsMultimodeIntermediate ReachParameterMultimodeSingle-modeOptical interfaceFixedFixedTra

SONET/SDH OC3/STM1 (Multi-Rate) PICs with SFPPORT3Left: SONET/SDH OC3/STM1 (Multi-Rate) PIC (Type 1); Right: SONET/SDH OC3/STM1 (Multi-Rate) PIC (Type

Optical diagnostics and related alarms Per-port SONET/SDH framing Link aggregation Alarm and event counting and detection Dual-router automatic prote

SONET alarms: Alarm indication signal—line (AIS-L) Alarm indication signal—path (AIS-P) Bit error rate signal degrade (BERR-SD) Bit error rate signal

Table 6: T1600 Ethernet PIC/FPC Compatibility (continued)GigabitEthernet,10-port SFPGigabitEthernet,4-port SFPGigabitEthernet,2-port SFPGigabitEtherne

Table 32: Optical Interface Support for SONET/SDH OC3/STM1 (Multi-Rate) PICs Configured at an OC3/STM1Rate (continued)Long Reach (LR-1)Intermediate Re

SONET/SDH OC12c/STM4 PIC JUNOS 8.5 and laterSoftware release One port Power requirement: 0.23 A @ 48 V (10.8 W)Description Multiplexing and demultiple

One tricolor per port: Off—Not enabled Green—Online with no alarms or failures Amber—Online with alarms for remote failures Red—Active with a local al

Table 34: Optical Interface Support for SONET/SDH OC12c/STM4 PICsMultimodeIntermediate ReachParameterMultimodeSingle-modeOptical interfaceFixedFixedTr

SONET/SDH OC12/STM4 (Multi-Rate) PICs with SFPLeft: 1-port SONET/SDH OC12/STM4 (Multi-Rate) PIC; Right: 4-port SONET/SDH OC12/STM4 (Multi-Rate) PIC 1-

Optical diagnostics and related alarms Per-port SONET/SDH framing Link aggregation Alarm and event counting and detection Dual-router automatic prote

SONET alarms: Alarm indication signal—line (AIS-L) Alarm indication signal—path (AIS-P) Bit error rate signal degrade (BERR-SD) Bit error rate signal

Table 35: Optical Interface Support for SONET/SDH OC12/STM4 (Multi-Rate) PICs Configured at an OC3/STM1Rate (continued)Long Reach (LR-1)Intermediate R

Table 37: Optical Interface Support for SONET/SDH OC12/STM4 (Multi-Rate) PICs Configured at anOC48/STM16 Rate (continued)Long Reach (LR-2)Intermediate

SONET/SDH OC48c/STM16 PIC with SFP JUNOS 8.5 and laterSoftware release Four OC48 ports Power requirement: 0.46 A @ 48 V (22.1 W)Description Multiplexi

Table 8: T1600 Ethernet IQ PIC/FPC CompatibilityGigabitEthernet IQ2,8-port SFPGigabitEthernet IQ2,4-port SFPGigabitEthernet IQ,2-port SFPGigabit Ether

You can install any transceiver supported by the PIC. For information about installing andremoving transceivers, see the PIC and Transceiver Installat

SONET alarms: Alarm indication signal—line (AIS-L) Alarm indication signal—path (AIS-P) Bit error rate signal degrade (BERR-SD) Bit error rate signal

Table 38: Optical Interface Support for SONET/SDH OC48c/STM16 PICs with SFP (continued)Long Reach (LR)Intermediate Reach (IR)Short Reach (SR)Parameter

SONET/SDH OC48/STM16 (Multi-Rate) PIC with SFP JUNOS 8.5 and later (Type 2)Software release Rate-selectable using one of the following rates: 1-port O

You can install any transceiver supported by the PIC. For information about installing andremoving transceivers, see the PIC and Transceiver Installat

SONET alarms: Alarm indication signal—line (AIS-L) Alarm indication signal—path (AIS-P) Bit error rate signal degrade (BERR-SD) Bit error rate signal

Table 39: Optical Interface Support for SONET/SDH OC48/STM16 (Multi-Rate) PICs Configured at anOC3/STM1 Rate (continued)Long Reach (LR-1)Intermediate

Table 41: Optical Interface Support for SONET/SDH OC48/STM16 (Multi-Rate) PICs Configured at anOC48/STM16 Rate (continued)Long Reach (LR-2)Intermediat

SONET/SDH OC192c/STM64 PIC JUNOS 8.5 and later (Type 3)Software release Two OC192 ports Power requirement: 0.45 A @ 48 V (21.6 W)Description Multiplex

Very short reach (VSR 1): 12-ribbon multimode fiber with MTP connector (Rx and Tx)Optical interface support—See Table 42 on page 100NOTE: To extend t