Juniper-networks T1600 Manual do Utilizador descarregar pdf (Página 74)

•

You can install any transceiver supported by the PIC.

•

Fiber-optic SFP transceivers:

•

Duplex LC/PC connector (Rx and Tx)

•

1000BASE-LH (model number: SFP-1GE-LH)

•

1000BASE-LX (model number: SFP-1GE-LX)

•

1000BASE-SX (model number: SFP-1GE-SX)

•

Optical interface specifications—see Gigabit Ethernet 1000BASE Optical Interface

Specifications

•

1000BASE-BX (model number pairs: SFP-GE10KT13R14 with SFP-GE10KT14R13,

SFP-GE10KT13R15 with SFP-GE10KT15R13, SFP-GE40KT13R15 with SFP-GE40KT15R13)—See

Fast Ethernet and Gigabit Ethernet Bidirectional SFP Optical Interface Specifications

•

Copper transceiver:

•

Connector: Four-pair, Category 5 shielded twisted-pair connectivity through an RJ-45

connector

•

1000BASE-T (model number: SFP-1GE-T)

•

Pinout: MDI crossover

•

Copper interface specifications—see Gigabit Ethernet 1000BASE-T Copper Interface

Specifications

NOTE: Do not install Gigabit Ethernet SFPs in the SONET/SDH port. The port will not recognize

the SFP.

Cables and connectors

Status LED, one bicolor:

•

Off—PIC is not enabled.

•

Green—PIC is operating normally.

•

Red—PIC has an error or failure.

Port LEDs, one pair per port:

•

Link—If green, the port is online; if there is no light, the port is down.

•

Activity—If flashing green, the port is receiving data; if there is no light, the port might be on but

is not receiving data.

LEDs

Documentation

T1600 PIC Description on page 3•

• High Availability Features on page 4

• T1600 PIC Combination Limitations on page 18

• T1600 PICs Supported on page 5

T1600 Core Router Interface Module Reference

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 150 151

Comentários a estes Manuais

Sem comentários

Juniper-networks T1600 Manual do Utilizador Página 74

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Juniper-networks T1600