Juniper-networks E-Series Manual do Utilizador descarregar pdf (Página 205)

Cable Pinouts

This appendix lists the cables and connector pinout assignments for the

cables used with the ERX-7xx models and ERX-14xx models.

SRP I/O Module

The SRP I/O module provides two management ports. You can connect

a console directly to the RS-232 serial port using a shielded

straight-through cable with a female DB-9 connector on one end and a

male DB-25 with a crossover adapter on the DB-25 end. This port is

called the serial port, the RS-232 port, or the console serial port.

Figure A-1 shows the location of the serial port and the sequence of the

pins in the RS-232 connector.

The console port is considered a data terminal equipment interface

(DTE). Direct connection to a terminal or PC (which also have DTE

interfaces) requires a crossover cable.

Topic Page

SRP I/O Module A-1

CT1 and CE1 I/O Modules A-4

1 2 ... 200 201 202 203 204 205 206 207 208 209 210 ... 241 242

Sem comentários

Juniper-networks E-Series Manual do Utilizador Página 205