Juniper-networks SRX 210 Manual do Utilizador Página 28

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 176
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 27
Table 8: SRX210 Services Gateway Built-In Hardware
Interfaces (continued)
DescriptionSpecificationsInterface Type
The Fast Ethernet ports can
be used as follows:
To provide LAN connectivity
to hubs, switches, local
servers, and workstations
To forward incoming data
packets to the device
To receive outgoing data
packets from the device
To connect power devices
to receive network
connectivity and electric
power (PoE functionality)
(For the PoE model of the
SRX210 Services Gateway)
Consist of six fixed ports
Are labeled as port 0/2 to
port 0/7 on the front panel
Provide link speeds of
10/100 Mbps
Operate in full-duplex and
half-duplex modes
The first two Fast Ethernet
ports support Power over
Ethernet on the SRX210
Services Gateway (PoE
version).
Fast Ethernet
The USB ports can be used as
follows:
To support a USB storage
device that functions as a
secondary boot device in
case of the internal flash
failure on startup, if the USB
storage device is installed
and configured
NOTE: You must install and
configure the USB storage
device on the USB port to use
it as secondary boot device.
Also, the USB device must
have Junos installed.
To provide the USB
interfaces that are used to
communicate with many
types of Juniper supported
USB storage devices.
Contact your Juniper Networks
customer service
representative for more
information.
Consist of two ports
Function in full speed and
high speed
Are compliant with USB
revision 2.0
Universal Serial Bus (USB)
Copyright © 2013, Juniper Networks, Inc.12
SRX210 Services Gateway Hardware Guide
Vista de página 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 175 176

Comentários a estes Manuais

Sem comentários