Juniper Networks SRX 210 Manual do Utilizador Página 1

SRX210 Services GatewayHardware GuideJuniper Networks, Inc.1194 North Mathilda AvenueSunnyvale, California 94089USA408-745-2000www.juniper.netRevision

Installing the SRX210 Services Gateway on a Wall ...76Replacing or Installing Mini-Physical Interface Modules in the SR

80 Replacing or Installing Mini-Physical Interface Modules in the SRX210 Services GatewaySRX210 Services Gateway Hardware Guide

Chapter 13Connecting, Grounding, and Powering Onthe SRX210 Services GatewayThis chapter includes the following topics: Connecting the SRX210 Services

Figure 25: Connecting the SRX210 Services Gateway to the Power SupplyNOTE: The device must be connected to earth ground during normal operation. Thepr

Connecting and Organizing Interface Cables to the SRX210 Services GatewayYou can connect the interfaces installed in the services gateway to various n

Grounding the SRX210 Services GatewayTo meet safety and electromagnetic interference (EMI) requirements and to ensureproper operation, you must adequa

To ground the device:1. Connect the grounding cable to a proper earth ground.2. Verify that a licensed electrician has attached the cable lug to the g

NOTE: After the power supply is turned on, it can take up to 60 seconds for statusindicators—such as the Status and Power LEDs—to show that the power

NOTE: To remove power completely from the device, unplug the AC power cord orswitch off the power source.After powering off a power supply, wait at le

88 Resetting the SRX210 Services GatewaySRX210 Services Gateway Hardware Guide

Chapter 14SRX210 Services GatewayAutoinstallationThis chapter includes the following topic: SRX210 Services Gateway Autoinstallation Overview on page

Part 3 Maintaining and Monitoring the SRX210 Services GatewayHardwareChapter 17 Maintaining the SRX210 Services Gateway HardwareComponents 115Maintain

90 SRX210 Services Gateway Autoinstallation OverviewSRX210 Services Gateway Hardware Guide

Chapter 15Connecting the SRX210 Services Gatewayto Management DevicesThis chapter includes the following topics: Connecting an SRX210 Services Gatewa

Figure 27: Connecting to the Ethernet Port on an SRX210 Services Gateway92 Connecting an SRX210 Services Gateway to the J-Web InterfaceSRX210 Servic

g031118Connecting an SRX210 Services Gateway to the J-Web Interface 93Chapter 15: Connecting the SRX210 Services Gateway to Management Devices

To connect to the Ethernet port:1. From the management device you use to access the J-Web interface (such as aPC or a laptop), verify that the address

Connecting an SRX210 Services Gateway to the CLI LocallyIf you plan to use the CLI to configure the SRX210 Services Gateway, you mustconnect through t

7. Start your asynchronous terminal emulation application (such as MicrosoftWindows HyperTerminal) and select the appropriate COM port to use (forexam

Related Topics Connecting an SRX210 Services Gateway to the CLI Locally on page 95 Performing Initial Software Configuration on the SRX210 Services

7.Configure the modem to accept modem control DTR signals by entering AT&D1.8.Disable flow control by entering AT&K0.9.Save modem settings by

Connecting to the CLI at the User End for the SRX210 Services GatewayTo remotely connect to the CLI through a dial-up modem connected to the consolepo

SRX210 Services Gateway Electrical Safety Guidelines and Warnings ...150SRX210 Services Gateway Agency Approvals ...

100 Connecting to the CLI at the User End for the SRX210 Services GatewaySRX210 Services Gateway Hardware Guide

Chapter 16Performing Initial Software Configurationon the SRX210 Services GatewayThis chapter includes the following topics: SRX210 Services Gateway

NOTE: The SRX210 services gateway that ship with JUNOS Release 10.0 or later areformatted with dual-root partitions from the factory. SRX Series devic

Table 38 on page 103 shows the mapping of the chassis cluster ports.Table 38: Mapping the Chassis Cluster Ports on an SRX210 Services GatewayManagemen

NOTE: Information sent in cleartext is not encrypted and therefore can be intercepted.If the device is operating in a Common Criteria environment, see

6. Configure an administrator account on the device.[edit]root@# set system login user admin class super-user authenticationplain-text-password7. Comm

15. Check the configuration for validity.[edit]admin@# commit checkconfiguration check succeeds16. Commit the configuration to activate it on the devi

19. Optionally, configure additional properties by adding the necessary configurationstatements. Then commit the changes to activate them on the devic

NOTE: If an IP address is not assigned to the management device, manually configurean IP address in the 192.168.1.0/24 subnetwork. Do not assign the 1

Table 39: Basic Configuration Summary (Device Identification) (continued)Your ActionFunctionFieldType a plaintext password that thesystem encrypts.NOT

Part 5 IndexIndex ...175Table of Contents xi

Table 41: Basic Configuration Summary (Date and Time)Your ActionFunctionFieldDate and TimeFrom the list, select the appropriate time zone.Identifies t

e. In the IPv4 Address and Prefix fields, enter an IP address and a subnet maskf. Click OK. The configured IP address is included in the Address Prefi

transmitted between the Web browser and the services gateway by means of HTTPis vulnerable to interception and attack. To enable secure Web access, th

Part 3Maintaining and Monitoring the SRX210Services Gateway Hardware Maintaining the SRX210 Services Gateway Hardware Components on page 115 Monitor

114 Maintaining and Monitoring the SRX210 Services Gateway HardwareSRX210 Services Gateway Hardware Guide

Chapter 17Maintaining the SRX210 ServicesGateway Hardware ComponentsThis chapter describes how to maintain the hardware components of the SRX210Servic

Related Topics Connecting the SRX210 Services Gateway to the Power Supply on page 81 Clearance Requirements for Airflow and Hardware Maintenance of

Chapter 18Monitoring the SRX210 Services GatewayThis chapter describes how to monitor the SRX210 Services Gateway hardwarecomponents. If you encounter

The following examples provide the sample output of commands:show chassis hardware For the SRX210 Services Gatewayuser@host > show chassis hardwar

NOTE: The values given in the usb0 rows provide information for USB level debugging.This information is about USB hub topology.show chassis environmen

xiv Table of ContentsSRX210 Services Gateway Hardware Guide

Monitoring the SRX210 Services Gateway Components Using LEDsTable 43: Component LEDs on the Services GatewayPossible Causes andCorrective ActionsMean

Table 43: Component LEDs on the Services Gateway (continued)Possible Causes andCorrective ActionsMeaningStateLEDNormal condition. Noaction is require

Table 43: Component LEDs on the Services Gateway (continued)Possible Causes andCorrective ActionsMeaningStateLEDNormal condition. Noaction is require

For more information on the show chassis alarms command, see the JUNOS SoftwareAdministration Guide.Table 44 on page 123 describes alarms that can occ

Table 44: SRX210 Services Gateway Chassis Alarm Conditions and CorrectiveActions (continued)AlarmSeverityActionAlarm ConditionComponentAmber(minor) Ch

Monitoring the SRX210 Services Gateway Power SystemThe LEDs on the services gateway enable you to determine the performance andoperation. The Power LE

Changing the Reset Config Button Behavior on the SRX210 Services Gateway onpage 127 Juniper Networks Technical Assistance Center on page 128Resetti

Related Topics Changing the Reset Config Button Behavior on the SRX210 Services Gateway onpage 127 Monitoring the SRX210 Services Gateway Chassis U

Monitoring the SRX210 Services Gateway Power System on page 125 Juniper Networks Technical Assistance Center on page 128Juniper Networks Technical

Part 4Appendixes Safety and Regulatory Compliance Information on page 131 SRX210 Services Gateway Power Guidelines, Requirements, andSpecifications

About This GuideThis preface includes the following topics: Objectives on page xv Audience on page xv Documentation Conventions on page xv SRX Ser

130 AppendixesSRX210 Services Gateway Hardware Guide

Appendix ASafety and Regulatory ComplianceInformationThis appendix includes the following topics: SRX210 Services Gateway Definition of Safety Warnin

WARNING: This symbol means danger. You are in a situation that could cause bodilyinjury. Before you work on any equipment, be aware of the hazards inv

Related Topics SRX210 Services Gateway General Safety Guidelines and Warnings on page 133 SRX210 Services Gateway Fire Safety Requirements on page

WARNING: Only trained and qualified personnel should install or replace the servicesgateway.Waarschuwing Installatie en reparaties mogen uitsluitend d

Attention Cet appareil est à installer dans des zones d'accès réservé. Ces dernièressont des zones auxquelles seul le personnel de service peut a

Many services gateway hardware components are sensitive to damage from staticelectricity. Some components can be impaired by voltages as low as 30 V.

SRX210 Services Gateway Fire Safety Requirements on page 137SRX210 Services Gateway Fire Safety RequirementsIn the event of a fire emergency involvi

SRX210 Services Gateway Installation Safety Guidelines and WarningsInstallation Instructions WarningWARNING: Read the installation instructions before

When mounting the services gateway in a partially filled rack, load the rack fromthe bottom to the top with the heaviest component at the bottom of

Table 1: Notice IconsDescriptionMeaningIconIndicates important features or instructions.Informational noteIndicates a situation that might result in l

Warnung Zur Vermeidung von Körperverletzung beim Anbringen oder Warten dieserEinheit in einem Gestell müssen Sie besondere Vorkehrungen treffen, umsic

O Juniper Networks services gateway deverá ser instalado numa prateleira fixaà estrutura do edificio. Esta unidade deverá ser montada na parte infe

SRX210 Services Gateway Laser and LED Safety Guidelines and WarningsThe 1-Port SFP Mini-Physical Interface Module (Mini-PIM) is equipped with lasertra

Varning! Laserprodukt av klass 1.Class 1 LED Product WarningWARNING: Class 1 LED product.Waarschuwing Klasse 1 LED-product.Varoitus Luokan 1 valodiodi

Aviso Não olhe fixamente para o raio, nem olhe para ele directamente cominstrumentos ópticos.¡Atención! No mirar fijamente el haz ni observarlo direct

Related Topics SRX210 Services Gateway Installation Safety Guidelines and Warnings on page 138 SRX210 Services Gateway Maintenance and Operational S

¡Atención! Existe peligro de explosión si la batería se reemplaza de manera incorrecta.Reemplazar la batería exclusivamente con el mismo tipo o el equ

Aviso Antes de trabalhar em equipamento que esteja ligado a linhas de corrente,retire todas as jóias que estiver a usar (incluindo anéis, fios e relóg

Operating Temperature WarningWARNING: To prevent the services gateway from overheating, do not operate it inan area that exceeds the maximum recommend

Varning! Förhindra att en Juniper Networks services gateway överhettas genom attinte använda den i ett område där den maximalt rekommenderadeomgivning

Table 2: Text and Syntax Conventions (continued)ExamplesDescriptionConvention To configure a stub area, includethe stub statement at the [editprotocol

SRX210 Services Gateway Electrical Safety Guidelines and WarningsIn Case of Electrical AccidentIf an electrical accident results in an injury, take th

SRX210 Services Gateway Agency ApprovalsThe SRX210 Services Gateway complies with the following standards: Safety CSA 60950-1 (2003) Safety of Infor

Immunity EN 55024 +A1+A2 (1998) Information Technology Equipment ImmunityCharacteristics EN-61000-3-2 (2006) Power Line Harmonics EN-61000-3-3 +A

The preceding translates as follows:This is a Class B product based on the standard of the Voluntary Control Council forInterference by Information Te

This is a Class A product based on the standard of the Voluntary Control Council forInterference by Information Technology Equipment (VCCI). If this e

Related Topics SRX210 Services Gateway Compliance Statements for EMC Requirements onpage 152 SRX210 Services Gateway Compliance Statements for Envi

156 SRX210 Services Gateway Compliance Statements for Acoustic NoiseSRX210 Services Gateway Hardware Guide

Appendix BSRX210 Services Gateway PowerGuidelines, Requirements, andSpecificationsThis appendix includes the following topics: SRX210 Services Gatewa

Table 46: Site Electrical Wiring Guidelines for the Services Gateway (continued)GuidelineSite Wiring FactorTo reduce or eliminate the emission of RFI

Table 47: Power Supply Electrical Specifications for the SRX210 ServicesGateway (continued)SpecificationPower Requirement1.5 A maximum2.5 A maximum (f

Obtaining DocumentationTo obtain the most current version of all Juniper Networks technical documentation,see the products documentation page on the J

Table 48: Grounding Cable Specifications for the Services Gateway (continued)SpecificationGrounding RequirementUp to 4 AAmperage of grounding cableRin

Appendix CSRX210 Services Gateway InterfaceCable Specifications and ConnectorPinoutsThe network interfaces supported on the services gateway accept di

Related Topics RJ-45 Connector Pinouts for the SRX210 Services Gateway Ethernet Port onpage 162 RJ-45 Connector Pinouts for the SRX210 Services Gate

Table 51: RJ-45 Connector Pinouts for the Services Gateway Ethernet Port (1 Gbps)SignalPinBI_DA+1BI_DA-2BI_DB+3BI_DC+4BI_DC-5BI_DB-6BI_DD+7BI_DD-8Rel

Table 52: RJ-45 Connector Pinouts for Services Gateway Console Port (continued)DescriptionSignalPinSignal GroundGround5Receive DataRXD6Data Set Ready

Related Topics Interface Cable and Wire Specifications for the SRX210 Services Gateway onpage 161 RJ-45 Connector Pinouts for the SRX210 Services G

166 RJ-11 Connector Pinouts for the SRX210 Services Gateway with Integrated Convergence Services FXO and FXS PortsSRX210 Services Gateway Hardware G

Appendix DContacting Customer Support andReturning the SRX210 Services GatewayHardwareThis appendix describes how to return the SRX210 Services Gatewa

NOTE: Do not return the device or any component to Juniper Networks unless youhave first obtained an RMA number. Juniper Networks reserves the right t

PIC 0 2x GE, 6x FE, 1x 3GPower Supply 0NOTE: In the show chassis hardware command, the Mini

Find CSC offerings: http://www.juniper.net/customers/support/ Search for known bugs: http://www2.juniper.net/kb/ Find product documentation: http://w

different on different Mini-PIMs, depending on the placement of components on theMini-PIM.Related Topics Packing the SRX210 Services Gateway and Compo

You can contact JTAC 24 hours a day, 7 days a week, using any of the followingmethods: On the Web: Using the Case Manager link at http://www.juniper.n

4. Shut down power to the device by pressing the Power button on the front panelof the device.5. Disconnect power from the device.6. Remove the cables

Part 5Index Index on page 175Index 173

174 IndexSRX210 Services Gateway Hardware Guide

IndexSymbols#, comments in configuration statements...xvii( ), in syntax descriptions...xvii3Gu

cooling system...24maintenance...115curl

JTAC...128, 170information required...170reque

returncomponent...167services gateway...167RJ-11 c

wall mountpreparing...68warningselectrical...

This product includes the Envoy SNMP Engine, developed by Epilogue Technology, an Integrated Systems Company. Copyright © 1986-1997, EpilogueTechnolog

xx Requesting Technical SupportSRX210 Services Gateway Hardware Guide

180 IndexSRX210 Services Gateway Hardware Guide

Part 1SRX210 Services Gateway Overview Introduction to the SRX210 Services Gateway on page 3 SRX210 Services Gateway Hardware Components and Specifi

2 SRX210 Services Gateway OverviewSRX210 Services Gateway Hardware Guide

Chapter 1Introduction to the SRX210 ServicesGatewayThis chapter includes the following topics: SRX210 Services Gateway Description on page 3 SRX210

Table 3: SRX210 Services Gateway ModelsModel NumberDevice TypeProduct NameSRX210BLow MemorySRX210 Services GatewaySRX210HHigh MemorySRX210 Services Ga

Table 4: SRX210 Services Gateway Hardware Features (continued)SRX210ServicesGateway withIntegratedConvergenceServicesSRX210ServicesGateway Powerover E

Related Topics SRX210 Services Gateway Description on page 3 SRX210 Services Gateway Specifications on page 76 SRX210 Services Gateway Hardware F

Chapter 2SRX210 Services Gateway HardwareComponents and SpecificationsThis chapter includes the following topics: SRX210 Services Gateway Specificati

Figure 1: SRX210 Services Gateway with Integrated Convergence ServicesFigure 2 on page 8 shows the SRX210 Services Gateway chassis (for low memory,hig

Table 5: SRX210 Services Gateway Specifications (continued)ValueSpecification 3.43 lb (1.56 kg) for SRX210 Services GatewayLow Memory and High Memory

END USER LICENSE AGREEMENTREAD THIS END USER LICENSE AGREEMENT (“AGREEMENT”) BEFORE DOWNLOADING, INSTALLING, OR USING THE SOFTWARE. BY DOWNLOADING,INS

CAUTION: Before removing or installing components of a functioning servicesgateway, attach an electrostatic discharge (ESD) strap to an ESD point and

Table 6: SRX210 Services Gateway Front Panel ComponentsComponentNumberMini-PIM slot1Power button2LEDs: Status, Alarm, Power, 3G ExpressCard, Mini-PIM,

Table 7: SRX210 Services Gateway Back Panel ComponentsComponentNumberPower supply point1Cable tie holder2Grounding point3Lock4ExpressCard slot5NOTE: T

Figure 5: SRX210 Services Gateway with Integrated Convergence Services FrontPanelTable 8 on page 13 lists the front panel components of the services g

Figure 6: SRX210 Services Gateway with Integrated Convergence Services BackPanelg031102Table 9 on page 14 lists the back panel components of the SRX21

Table 10: SRX210 Services Gateway Built-In Hardware InterfacesDescriptionSpecificationsInterface TypeThe Gigabit Ethernet ports canbe used as follows:

Table 10: SRX210 Services Gateway Built-In Hardware Interfaces (continued)DescriptionSpecificationsInterface TypeThe USB ports can be used asfollows:

Table 10: SRX210 Services Gateway Built-In Hardware Interfaces (continued)DescriptionSpecificationsInterface TypeThe FXS port can be used asfollows: T

SRX210 Services Gateway LEDs on page 18 SRX210 Services Gateway Boot Devices and Dual-Root Partitioning Scheme onpage 23 SRX210 Services Gateway C

Table 11: SRX210 Services Gateway Front Panel Components LEDsUsageDescriptionComponentThe Alarm LED can beused to gatherinformation on major orminor a

6. Confidentiality. The Parties agree that aspects of the Software and associated documentation are the confidential property of Juniper. As such, Cus

Table 11: SRX210 Services Gateway Front Panel Components LEDs (continued)UsageDescriptionComponentThe 3G ExpressCard LEDprovides information onthe fun

NOTE: The numbers in Figure 8 on page 20 correspond to the numbers in Table 12on page 21.Table 12 on page 21 describes the built-in Ethernet port LEDs

Figure 9: SRX210 Services Gateway Voice Interface Port LEDsTable 13 on page 22 describes the Voice Interface port LEDs.Table 13: SRX210 Services Gate

SRX210 Services Gateway Cooling System on page 24 SRX210 Services Gateway Power Supply on page 26SRX210 Services Gateway Boot Devices and Dual-Root

For instructions on upgrading to JUNOS Software Release 10.0, see the SRX SeriesRelease Notes.Related Topics SRX210 Services Gateway Specifications

Figure 10: Airflow Through the Chassis (SRX210 Services Gateway with Low Memory,High Memory, and PoE Models)g031140RearFanAir flowFrontFigure 11 on pa

Figure 11: Airflow Through the Chassis (SRX210 Services Gateway with IntegratedConvergence Services Model)FrontRearAir flowFanFang031171Related Topics

Figure 12: SRX210 Services Gateway — 48 V Power Supplyg037542Figure 13 on page 27 shows the label for the 54 V power supply.Figure 13: SRX210 Services

SRX210 Services Gateway with Integrated Convergence Services Front Paneland Back Panel Views on page 12 SRX210 Services Gateway Boot Devices and Du

Chapter 3SRX210 Services Gateway 3GExpressCardThis chapter includes the following topics: SRX210 Services Gateway 3G ExpressCard Overview on page 29

agreements relating to the Software, whether oral or written (including any inconsistent terms contained in a purchase order), except that the terms o

Table 14: Juniper Networks Wireless Modems Supported by the SRX210 Services GatewayRelease SupportedWireless CardsJUNOS Software Releases 9.6, 10.0, 1

NOTE: Only GSM cards support locking and unlocking of the SIM. Interface support — The ExpressCard interface supports the IP over PPP interfacefrom t

Table 15: 3G ExpressCard Physical Specifications (continued)ValueSpecification 3.3V (primary source) 1.5V (secondary source)Voltage supplyRelated Topi

Figure 14: Installing 3G ExpressCard in the SRX210 Services Gateway3. Insert the 3G ExpressCard slowly and firmly into the ExpressCard slot until the3

Table 16: SRX210 Services Gateway 3G ExpressCard Basic CLI Commands (continued)CommandActionrequest modem wireless activate request modem wireless act

Chapter 4SRX210 Services Gateway Power overEthernet SupportThis chapter includes the following topics: SRX210 Services Gateway PoE Overview on page 3

Table 17: SRX210 Services Gateway PoE Specifications (continued)ValuesPower Management SchemesThe following ports support PoE: ge-0/0/0 ge-0/0/1 fe-0/

Table 18: PoE Classes and Power Ratings on the SRX210 Services GatewayMaximum Power Level Output from the PoE PortClass15.4 watts04.0 watts17.0 watts

38 Configuring PoE Functionality on the SRX210 Services GatewaySRX210 Services Gateway Hardware Guide

Chapter 5SRX210 Services Gateway with IntegratedConvergence ServicesThis chapter includes the following topics: About the SRX210 Services Gateway wit

vi

Basic FunctionsThe availability of hardware and software for voice and data transmission on thesame device is called integrated convergence services.S

Common Deployment ScenariosThe SRX210 Services Gateway with Integrated Convergence Services is deployed infollowing environments: Enterprises that de

NOTE: The 2-Port FXS/2-Port FXO Mini-PIM and the 4-Port FXO Mini-PIM does notsupport failover relay between any of the FXS and FXO ports. Telephony i

Table 19: SRX210 Services Gateway Integrated Convergence ServicesInteroperability (continued)DevicesPhone TypesAny analog device including the phones,

44 Configuring the SRX210 Services Gateway with Integrated Convergence ServicesSRX210 Services Gateway Hardware Guide

Chapter 6SRX210 Services Gateway Mini-PhysicalInterface ModulesThis chapter includes the following topic: SRX210 Services Gateway Mini-Physical Inter

46 SRX210 Services Gateway Mini-Physical Interface ModulesSRX210 Services Gateway Hardware Guide

Part 2Setting Up the SRX210 Services Gateway Preparing the Site for the SRX210 Services Gateway Installation on page 49 Installation Overview for th

48 Setting Up the SRX210 Services GatewaySRX210 Services Gateway Hardware Guide

Chapter 7Preparing the Site for the SRX210Services Gateway InstallationThis chapter provides a checklist to help you prepare your site for installatio

Table of ContentsAbout This Guide xvObjectives ...x

Table 20: Site Preparation Checklist for the SRX210 Services GatewayInstallation (continued)DateandNotesAdditional InformationItem or Task“SRX210 Serv

Installation Overview for the SRX210 Services Gateway on page 57 SRX210 Services Gateway Cabinet Requirements on page 51 SRX210 Services Gateway R

Table 21: SRX210 Services Gateway Cabinet RequirementsSpecificationsCabinetRequirements19 in. (48.3 cm) as defined in Cabinets, Racks, Panels, and Ass

NOTE: The services gateway cannot be center-mounted in racks.Table 22 on page 53 provides the details on rack size, clearance, and airflowrequirements

Clearance Requirements for Airflow and Hardware Maintenance of the SRX210Services GatewayWhen planning the installation site for the SRX210 Services G

Related Topics SRX210 Services Gateway Description on page 3 General Site Guidelines for Installing the SRX210 Services Gateway on page 51 Site Pr

56 SRX210 Services Gateway Electrical and Power RequirementsSRX210 Services Gateway Hardware Guide

Chapter 8Installation Overview for the SRX210Services GatewayThis chapter includes the following topic: Installation Overview for the SRX210 Services

Table 24: Installation Process Order for the SRX210 Services Gateway (continued)For more information, seeTaskStep“Grounding the SRX210 ServicesGateway

Chapter 9Required Tools and Parts for Installingand Maintaining the SRX210 ServicesGatewayThis chapter includes the following topic: Required Tools a

SRX210 Services Gateway Boot Devices and Dual-Root PartitioningScheme ...

Table 25: Required Tools and Parts for Installing and Maintaining the SRX210 ServicesGateway (continued)Related TopicTools and PartsTask“Packing the S

Chapter 10Unpacking the SRX210 Services GatewayThis chapter includes the following topics: Unpacking the SRX210 Services Gateway on page 61 Verifyin

against the items on the packing list. The packing list specifies the part numbers anddescriptions of each part in your order.If any part is missing,

Table 27: Accessory Parts List for the SRX210 Services Gateway (continued)QuantityPart1Quick Start Guide1Security Products Safety Guide1Juniper Compli

64 Verifying Parts Received with the SRX210 Services GatewaySRX210 Services Gateway Hardware Guide

Chapter 11Preparing the SRX210 Services Gatewayfor InstallationThis chapter includes the following topics: Preparing the SRX210 Services Gateway for

Preparing the SRX210 Services Gateway for Rack-Mount InstallationYou can mount an SRX210 Services Gateway on four-post (telco) racks, enclosedcabinets

Related Topics Site Preparation Checklist for the SRX210 Services Gateway on page 49 Clearance Requirements for Airflow and Hardware Maintenance of

Related Topics Site Preparation Checklist for the SRX210 Services Gateway on page 49 Clearance Requirements for Airflow and Hardware Maintenance of

Chapter 12Installing the SRX210 Services GatewayThis chapter includes the following topics: SRX210 Services Gateway Safety Requirements, Warnings, an

Part 2 Setting Up the SRX210 Services GatewayChapter 7 Preparing the Site for the SRX210 Services Gateway Installation 49Site Preparation Checklist fo

Install the device as appropriate for your site using one of the following procedures: Adjusting the Power Supply Adapter Tray for the SRX210 Service

To accommodate the 150-watt power supply, use the 420–028535 screw toattach the adapter stopper bracket at the point on the chassis marked A.Figure

NOTE: If you are installing multiple devices in one rack, install the lowest one first andproceed upward in the rack. Ensure that the rubber feet fr

Figure 18: SRX210 Services Gateway Rack Installation — Securing Mounting Bracketsand Power Supply Adapter Tray3. Place the power supply adapter in the

Figure 20: SRX210 Services Gateway Rack Installation — Hanging the ServicesGateway in a Rack6. Have a second person install a mounting screw into each

Installing the SRX210 Services Gateway on a DeskFollow these guidelines when installing the device on a desk: You can install the SRX210 Services Gat

Figure 22: SRX210 Services Gateway Desk Installation — Placing the ServicesGateway on DeskRelated Topics SRX210 Services Gateway General Safety Guid

1. Place the device on a flat and level surface with Juniper Networks logo embossedon the top cover facing up. Ensure that rubber feet are attached to

Figure 24: SRX210 Services Gateway Wall Installation — Hanging the ServicesGateway on WallRelated Topics SRX210 Services Gateway General Safety Guid

The Mini-Physical Interface Module (Mini-PIM) slot is covered with a blank faceplateto maintain proper airflow through the services gateway. Before in